N-Spoorforum

Hallo allemaal,

Ik heb een gebruikte Fleischmann e-loc aangeschaft waar een Zimo 622 decoder in zit.
Ik kan echter niet vinden hoe ik een rangeersnelheid in kan stellen (bv met F3).
Iemand die mij op weg kan helpen?

Mvg, Willem

CV124
Select a function key for LOW GEAR ACTIVATION:
Bit 4 = 1 (and Bit 3 = 0): F3 as half-speed key Bit 3 = 1 (and Bit 4 = 0): F7 as half-speed key
Select a function key for MOMENTUM DEACTIVATION:
Bit 2 = 0 (and Bit 6 = 0): “MN” key for deactivation, Bit 2 = 1 (and Bit 6 = 0): F4 key for deactivation Bit 6 = 1 (Bit 2 is irrelevant): F3 for deactivation.
Effect of above key (MN, F3 or F4) on MOMENTUM:
Bit 1, 0 = 00: no effect on momentum = 01: removes momentum of CV #121 + #122 = 10: CV #3 + #4 reduced to ¼. = 11: removes all momentum above.
EXAMPLES:
F3 for half speed-key: CV #124 = 16.
F3 for half speed-key and F4 to remove momentum completely: Bits 0, 1, 2 & 4 = 1; that is CV #124 =23.
F3 for half-speed key and removing momentum: Bits 0, 1, 4 &6 = 1; that is CV #124 = 83.

--
CV155
Expanding on the settings of CV #124; if another key is required than F3 or F7:
CV #155: Defines a function key for half-speed activa-tion (= top speed cut in half).
If a key is assigned with CV #155, a possible assign-ment through CV #124 is disabled.
CV #155 = 0 doesn’t mean that the F0 key is assigned but rather that the setting in CV #124 is active.

--
CV156
This CV deactivates the configuration for F-keys in CV #124 (Bits 2&6) in case they are not satisfactory. The ef-fects (Bits 0&1) of the momentum don NOT change.
The assignment of a key for the deactivation of the mo-mentum is deactivated, if CV 156>0 (i.e.: a key is de-fined here). Additionally you can suppress the change of the lights wen changing direction with Bit 7=1.
After defining a key with this CV, the momentum deacti-vation or reduction still needs to be defined in CV #124:
CV #124, Bit 1, 0: = 00: no effect on momentum

Hoi,

Ik zou beginnen met F3 for half speed-key: CV #124 = 16

groet,
Guus

Guus,
Dank je voor je complete uitleg.
Ik ga het morgenochtend proberen.

Mvg. Willem

Het is helemaal gelukt Guus.
Bedankt voor je uitgebreide uitleg.